Specification------Laser chiller---- air cooled
In laser system, laser source and beam controller would need to be cooled. Cooling water is normally required in the range of 15âï¿½ï¿½ to 22âï¿½ï¿½, with ±1âï¿½ï¿½ or ±2âï¿½ï¿½ accuracy and sometimes within ±0.1âï¿½ï¿½. Laser has special requirements for conductivity and corrosiveness of cooling water, normally water loop should be stainless steel materials. Application
Laser chiller is mainly applied for laser marker, laser engraving machine, laser welder, laser cutting machine, laser ink jet machine, etc., for maintaining required temperature of laser equipment, so to ensure normal running. Design features
¨ Large volume SS storage tank and SS coil evaporator.
¨ Built-in high pressure stainless steel chilled water pump, ensuring water quality and pressure.
¨ Well-known brand exhaust fan with large volume,excellent heat dissipation and low noise.
¨ Precision filtering device can be offered upon request, including particulate matter filtration and deionizer, ensuring high cooling water quality, extending laser and chiller's service life.
¨ Multi-protection devices: flow switch , water pressure switch, acoustic and optical alarm system.
¨ Protection signal output: water flow alarm signal output, water level alarm signal output, temperature protection alarm signal output, ensuring laser and chiller running safely.
|nominal cooling capacity
||3PH 380V-415V 50HZ
||Thermostatic expansion valve
||finned copper tube + low noise outer rotor fan
||stainless steel tank with copper coil built-in or Plate heat exchanger
|inlet and outlet
1. norminal cooling capacity according to:
coolant inlet inlet 7C, outlet 12C, temperature difference from 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C ambient temperature;
3. Specification, appearances and dimensions are subject to change without notice.