JUPITER
Automatic, Horizontal filling machine Mod. JUPITER with one filling tool and one drill for the production of industrial cylinder brushes, disc brushes and lag brushes. Production Speed: up to 360 tufts/min. with 200 mm filling stroke up to 250 tufts/min. with 280 mm filling stroke Compressed Air: 7 bar Power draw: 17 Kw Dimensions: 66860x4514x3049mm 270”x177”x120H” (with this version it is possible to produce Cylinder and Lag brushes with a maximum block length of 2000 mm) Weight: 4500 Kg (in the version for Cylinders and Lag brushes up to 2000 mm)
Automatic, Horizontal filling machine Mod. JUPITER with one filling tool and one drill for the production of industrial cylinder brushes, disc brushes and lag brushes. The machine is controlled by 5 indipendent electronic axes achieved via a PC and “brushless” servo-motors that allow a radial and parallel tufting or any combination. The maximum flare angle for Cylinder and Lag Brushes is 40° on each edge and 50° for Disc Brushes. There are two versions available depending on the stroke of the filling tool: - 200 mm stroke, that can work a maximum fiber length of 500 mm (unfolded) 19.6’’ - 280 mm stroke, that can work a maximum fiber length of 700 mm (unfolded) 27.5’’ The extreme versatility of the machine allows the user to change the set-up from Cylinder Brushes to Lag Brushes, to Disc Brushes in a matter of minutes. The machine can produce several different Brush dimensions in one cycle: Cylinder Brushes Brush block length: up to 2000 mm (78.7’’) Block outside diameter: from 50 mm (1.9’’) to 400 mm (15.7’’) Maximum Brush diameter with fibers: 900 mm (35.4’’) Maximum Flare angle: 40° on both sides Disc Brushes Brush block diameter: up to 900 mm (35.4’’) depending on the type of carriage Lag Brushes Brush block length: up to 2000 mm (78.7’’) Brush block width: up to 200 mm (7.8’’) Maximum Flare angle: 40° on both sides An automatic lubrication system keeps maintenance to a minimum. The machine meets all requirements in laws for Safety and Health imposed by the European Community and it is certified by the “CE” mark. Production Speed: up to 360 tufts/min. with 200 mm filling stroke up to 250 tufts/min. with 280 mm filling stroke Compressed Air: 7 bar Power draw: 17 Kw Dimensions: 6000x2500x2500 mm 236”x98”x98” (with this version it is possible to produce Cylinder and Lag brushes with a maximum block length of 2000 mm) Weight: 4500 Kg (in the version for Cylinders and Lag brushes up to 2000 mm)
